3-Side-Seal Pouch · dieline template
5x7 3-Side-Seal Pouch Dieline
Flat pouch sealed on three sides with an open top. Optional zipper, tear notches, hang hole, rounded corners. Dimensions are in inches. Change any detail - zipper, hang hole, tear notches, closures, mm units - in the tool, then request the print-ready PDF.
Customize this dieline
SIDE SEAL 0.375"
SIDE SEAL 0.375"
BOTTOM SEAL 0.375" - NO INK
SIDE SEAL 0.375"
SIDE SEAL 0.375"
BOTTOM SEAL 0.375" - NO INK
5" FRONT
5" BACK
10.5" LAYOUT WIDTH
7" HEIGHT
FRONT
BACK
3-SIDE-SEAL POUCH 5" W x 7" H | FULL SIZE 1:1
POUCH GEOMETRY IS A STANDARD APPROXIMATION - CONFIRM AGAINST THE SUPPLIER TEMPLATE BEFORE ART APPROVAL.
SEALS: SIDES 0.375" | TOP OPEN (FILL FROM TOP) | BOTTOM 0.375" - NO INK
Dashed = fold / perf. Solid = cut. DIE1 = spot cut line. Marker lines (seals, no-print) are not cut.
ARTWORK: CMYK, 300 DPI MIN. SUBMIT AS AI OR PDF/X-1A. KEEP ART INSIDE THE BOLD OUTLINE. CONFIRM ORIENTATION BEFORE APPROVAL.
3-SIDE-SEAL POUCH DIELINE
FLEXIBLE PACKAGING DIVISION | 2026-10-22 | FULL SIZE 1:1
Friesen Plastics Inc. | 2926 - 7th Avenue North, Lethbridge, AB T1H 5C6 | 403.328.0364 | www.fpbags.com
Made with Dieline Creator. Confirm sizes and seal areas with your Friesen representative before art approval.
FP BRANDING LAYER - NOT PART OF THE PRINT - HIDE IT WHEN PLACING ART
5x7
What's on this dieline
Seal margins are marker lines only. Tear notches sit above the zipper. Cut line, folds (dashed), seal margins and no-print zones on separate spot-colour layers. Artwork: CMYK, 300 DPI minimum, AI or PDF/X-1A. Pouch seal widths and the stand-up bottom curve are standard approximations - confirm against your supplier's template before art approval.
Other 3-side-seal pouch sizes 4x6 · 6x9 · 8x10 · 9x12 · 10x14
