Bottom-Seal Poly Bag · dieline template
10x14 Bottom-Seal Poly Bag Dieline
Flat poly bag sealed across the bottom with the open end at the top. Optional side gussets, header + zipper, hang hole, die-cut handle. Dimensions are in inches. Change any detail - zipper, hang hole, tear notches, closures, mm units - in the tool, then request the print-ready PDF.
Customize this dieline
BOTTOM SEAL LINE 0.5"
BOTTOM SEAL LINE 0.5"
NO PRINT 0.25" (ink tolerance)
NO PRINT 0.25" (ink tolerance)
0.75" TO PRINT AREA
TOP OF BAG
TOP OF BAG
WEB / REPEAT DIRECTION
10" FRONT
10" BACK
20" OVERALL
14" LENGTH
FRONT
BACK
SEAM / FOLD
BOTTOM-SEAL BAG 10" W x 14" L | FULL SIZE 1:1
BOTTOM SEAL LINE 0.5" FROM BOTTOM EDGE
PRINT AREA STARTS 0.75" ABOVE THE BOTTOM EDGE (SEAL 0.5" + 0.25" TOLERANCE)
Dashed = fold / perf. Solid = cut. DIE1 = spot cut line. Marker lines (seals, no-print) are not cut.
ARTWORK: CMYK, 300 DPI MIN. SUBMIT AS AI OR PDF/X-1A. KEEP ART INSIDE THE BOLD OUTLINE. CONFIRM ORIENTATION BEFORE APPROVAL.
BOTTOM-SEAL BAG DIELINE
FLEXIBLE PACKAGING DIVISION | 2026-10-22 | FULL SIZE 1:1
Friesen Plastics Inc. | 2926 - 7th Avenue North, Lethbridge, AB T1H 5C6 | 403.328.0364 | www.fpbags.com
Made with Dieline Creator. Confirm sizes and seal areas with your Friesen representative before art approval.
FP BRANDING LAYER - NOT PART OF THE PRINT - HIDE IT WHEN PLACING ART
10x14
What's on this dieline
Bottom seal line is a marker 0.5" from the bottom edge; printing starts a further 0.25" above it. A zipper needs a header. Side gussets are dashed folds. Cut line, folds (dashed), seal margins and no-print zones on separate spot-colour layers. Artwork: CMYK, 300 DPI minimum, AI or PDF/X-1A. Pouch seal widths and the stand-up bottom curve are standard approximations - confirm against your supplier's template before art approval.
Other bottom-seal poly bag sizes 6x9 · 8x12 · 12x15 · 14x20
