Stand-Up Pouch · dieline template
10x14x4 Stand-Up Pouch Dieline
Doyen-style stand-up pouch with a bottom gusset, optional zipper, tear notches, hang hole and spout. Dimensions are in inches. Change any detail - zipper, hang hole, tear notches, closures, mm units - in the tool, then request the print-ready PDF.
Customize this dieline
SIDE SEAL 0.375"
SIDE SEAL 0.375"
BOTTOM SEAL 0.375" - NO INK
DOYEN SEAL (APPROX.)
SIDE SEAL 0.375"
SIDE SEAL 0.375"
BOTTOM SEAL 0.375" - NO INK
DOYEN SEAL (APPROX.)
BASE FOLD
BASE FOLD
BOTTOM GUSSET (VIEW FROM BELOW)
FOLD
10"
4"
10" FRONT
10" BACK
20.5" LAYOUT WIDTH
14" HEIGHT
4" GUSSET
FRONT
BACK
STAND-UP POUCH 10" W x 14" H | 4" BOTTOM GUSSET | FULL SIZE 1:1
POUCH GEOMETRY IS A STANDARD APPROXIMATION - CONFIRM AGAINST THE SUPPLIER TEMPLATE BEFORE ART APPROVAL.
SEALS: SIDES 0.375" | TOP OPEN (FILL FROM TOP) | BOTTOM 0.375" - NO INK
BOTTOM GUSSET VIEW: 10" x 4" - SEAL INSET 0.375" SIDES / 0.375" ENDS
Dashed = fold / perf. Solid = cut. DIE1 = spot cut line. Marker lines (seals, no-print) are not cut.
ARTWORK: CMYK, 300 DPI MIN. SUBMIT AS AI OR PDF/X-1A. KEEP ART INSIDE THE BOLD OUTLINE. CONFIRM ORIENTATION BEFORE APPROVAL.
STAND-UP POUCH DIELINE
FLEXIBLE PACKAGING DIVISION | 2026-10-22 | FULL SIZE 1:1
Friesen Plastics Inc. | 2926 - 7th Avenue North, Lethbridge, AB T1H 5C6 | 403.328.0364 | www.fpbags.com
Made with Dieline Creator. Confirm sizes and seal areas with your Friesen representative before art approval.
FP BRANDING LAYER - NOT PART OF THE PRINT - HIDE IT WHEN PLACING ART
10x14x4
What's on this dieline
Seal margins are marker lines only. The doyen seal curve is an approximation. Cut line, folds (dashed), seal margins and no-print zones on separate spot-colour layers. Artwork: CMYK, 300 DPI minimum, AI or PDF/X-1A. Pouch seal widths and the stand-up bottom curve are standard approximations - confirm against your supplier's template before art approval.
Other stand-up pouch sizes 4x6x2 · 5x8x3 · 6x9x3 · 7x9x3 · 8x12x4 · 9x13x4
